C1-1G-RG2 Re-generation Tap allows monitoring of one single network link by 2 devices simultaneously. It works in any IDS, Protocol or other half/full-duplex, monitoring application.
C1-1G-RG2 tap avoids downtime in your 10/100/1000 Base-T networks. Once in place it allows you to monitor full and half duplex communication and move test equipment without breaking the circuit. It mirrors any packet size, bad CRC, VLAN traffic, sees both ends of full-duplex links.
It is a single port 10/100/1000 Base-T Tap for half/full duplex Ethernet networks. The redundant power feature makes it ideal for security applications. C1-1G-RG2 tap has no IP address and is invisible to the network. It is fault tolerant, bypasses data on power failure, the monitor ports are none-intrusive to the network.
C1-1G-RG2 Tap has 6 RJ45 ports. Network ports A and B are connected to the network, Monitor ports A1, A2, B1 and B2 are connected to the analyzers. C1-1G-RG2 tap is redundant powered from the back. The external power can be chained as each power has two sockets. Using redundant powering guarantees a maximum uptime off the monitor ports. Two LEDs show the presence of power.