I/O Controller 2 Set

$455.00

SKU: 600550 Categories: , ,

I/O Controller 2 connects a full RS-232(485) serial port and digital I/O to the Ethernet. Configuration is Web-based. The serial port can be used as a terminal server (virtual serial port). Digital inputs and outputs can be controlled over the Web or through Modbus/TCP.

Startup package – 8x DI, 8xDO RS-232/485 to Ethernet converter. Contains test board, power adaptor and CD.

I/O Controller 2 can be connected with a PC over the LAN in order to use the I/O Controller 2’s serial port as a Virtual Serial Port (VSP). HW group offers a free HW VSP application that supports up to 100 remote serial ports (support includes Windows 7 and x64 systems). I/O Controller 2 offers a truly full RS-232 serial port (9 signals). Two devices can be connected peer-to-peer (Box-2-Box mode). In this mode, the digital I/O as well as the RS232/485 serial line are extended (tunneled) over the LAN.

  • Link up to eight buttons / switches with a SW application.
  • Connect your RS-232 devices to your LAN – barcode / RFID scanners, serial printers, displays.
  • The outputs can, for example, open a door, turn on a horn, or disconnect power – remotely over the network.
  • Remote control of power and other technology over RS-232 and RS-485
  • I/O can be controlled over Modbus/TCP from any SCADA system, independently of the serial line
  • Remote status checks of PIR sensors, door contacts and security systems
  • Card readers, RFID, Vending machines, Security alarms, Access control systems, UPS control and logging devices, Barcode scanners

 

  • Server room environment monitoring
    • Temperature in a 19″ cabinet and in the room
    • Remote environment monitoring (lights, power, fire protection system, …)
    • IT monitoring of security systems (alarms, room / cabinet doors monitoring, …)
  • Remote environmental monitoring in a cabinet or in a datacenter
    • Temperature and humidity in the datacenter (inside racks, in the A/C outlet, under the raised floor)
    • Detection of redundant power failures
    • SNMP environment monitoring system
  • Air-conditioning monitoring
    • A/C, temperature, humidity monitoring
    • Control of additional cooling in a room or in a rack
    • Alert to leaking water
  • UPS / back-up generator monitoring Fuel level, diesel generator status, remote start over IP, monitoring of temperature and service contacts
  • Remote I/O control and monitoring over the Ethernet Monitors a remote environment, sensor values can be fed into any SNMP system. Enables remote reading of dry contact inputs and remote control of relay outputs (to turn on HVAC, restart a server, start a diesel generator, …).
  • Industrial applications Remote monitoring of dry contacts, 4-20mA sensors or Pt-100 and Pt-1000 temperature probes. Data logger stores the values in the internal memory. Modbus/TCP protocol can be used for integration with SCADA systems.
  • Cooler and freezer monitoring alarm indication Measures temperature and humidity in a cooler or a freezer. When a value is out of a safe range, a relay output is activated to e.g. turn on a warning light or sound a horn. Suitable for monitoring storages of food or pharmaceuticals. We recommend the PDMS software to monitor temperature.
  • Temperature and other measurements in a cloud Poseidon2 remote monitoring device can be connected to cloud systems. Contact us for details.
  • Surveillance systems Sensor readings and detector states can be fed to IP camera systems of various brands. Digital Outputs can be used to turn on the lights in a certain zone or open/close gates.
  • Smart buildings Sensor readings can be shared in several applications. Relay outputs can be controlled as remote I/O.

Live demo: poseidon2.hwg.cz

TruePath is the exclusive partner of HWgroup covering their entire product line.  Feel free to contact us for direct sales, distributor sales and technical support.

You may also like…