HWG Relay Output 1W-UNI


SKU: 600662 Categories: , ,

The Relay Output 1W-UNI is a 4× NO/NC relay output expansion module for Ares 12 connected via 1-Wire UNI. Relay Output 1W-UNI allows remote control of connected devices:

  • via SensDesk portal
  • based on alarm event on Ares 12
  • manually via SMS sent to Ares 12

External Relay output 1W-UNI module allows to expand Ares 12 functionality by remote control of up to 4 relay outputs with a dry contact (NO/NC) capable of up to 50V / 1A load.

The relay outputs can be controlled via the SensDesk portal as well as through local conditions (alarms) in the Ares unit or via SMS.

Relay output 1W-UNI module always uses 4 sensor positions from the 1-Wire UNI bus limit. When used with Ares 12 which can connect up to 14 external sensors next to the Relay Output 1W-UNI you can connect for instance up to 10 temperature sensors.

To one active port (RJ11 connector of the Ares device) maximum of 2 Relay output 1W-UNI can be connected. To strengthen the power supply an external 5V adapter or a powered “1-Wire hub Power” accessory can be used.

Supplied with a 3m RJ11 cable.

  • Interface: 1-Wire UNI (2x RJ11)
  • Connects to: Ares 12 (and Ares 14)
  • Output: 4x relay output – NO/NC (50V / 1A total)
  • Addresses: Each DO output has one unique sensor ID
  • Limitations: The module uses 4 sensor positions of the 1-Wire UNI bus
  • Power: Bus-powered (1-Wire UNI) or external 5V adaptor
  • Environment: Indoor use


Relay Output 1W-UNI Manual

TruePath is the exclusive partner of HWgroup covering their entire product line.  Feel free to contact us for direct sales, distributor sales and technical support.

You may also like…