Damocles 2404i recommended start set. Damocles 2404i, Wall plug power adaptor & manual included.
Limited quantity in stock.
PRODUCT REPLACED BY NEW GENERATION: DAMOCLES2 2404 SET
Damocles 2404i provides access to 24 binary inputs (for contacts) and 4 relay outputs over an IP network. Upon closing the selected inputs or their combination, Damocles sends an e-mail (2 recipients) or a SNMP trap (up to 4 recipients).
Box-2-Box mode An output relay can be controlled with one of the four SNMP traps sent from another Damocles or Poseidon unit.
For instance, UPS state (contact closing) can be signaled over an IP network to a monitoring centre in another building, without any SW.
- Remote rack monitoring
Open door indication, circuit breaker states, remote restart / door unlocking
- Intelligent buildings
Equipment monitoring, building control over IP
- SCADA systems
Connection of external inputs to multiple systems
- UPS and back-up generator monitoring Fuel level, diesel generator status, remote start over IP, monitoring of service dry contacts
- IP-based security systems
- Surveillance systems (sensor states)(external sensors)
- Equipment status, access control systems
- Server room environment monitoring
- Temperature in a 19″ cabinet and in the room
- Remote environment monitoring (lights, power, fire protection system, …)
- IT monitoring of security systems (alarms, room / cabinet doors monitoring, …)
- Remote environmental monitoring in a cabinet or in a datacenter
- Temperature and humidity in the datacenter (inside racks, in the A/C outlet, under the raised floor)
- Detection of redundant power failures
- SNMP environment monitoring system
- Air-conditioning monitoring
- A/C, temperature, humidity monitoring
- Control of additional cooling in a room or in a rack
- Alert to leaking water
- UPS / back-up generator monitoring
Fuel level, diesel generator status, remote start over IP, monitoring of temperature and service contacts
- Remote I/O control and monitoring over the Ethernet
Monitors a remote environment, sensor values can be fed into any SNMP system. Enables remote reading of dry contact inputs and remote control of relay outputs (to turn on HVAC, restart a server, start a diesel generator, …).
- Industrial applications
Remote monitoring of dry contacts, 4-20mA sensors or Pt-100 and Pt-1000 temperature probes.
Data logger stores the values in the internal memory. Modbus/TCP protocol can be used for integration with SCADA systems.
- Cooler and freezer monitoring alarm indication
Measures temperature and humidity in a cooler or a freezer. When a value is out of a safe range, a relay output is activated to e.g. turn on a warning light or sound a horn. Suitable for monitoring storages of food or pharmaceuticals. We recommend the PDMS software to monitor temperature.
- Temperature and other measurements in a cloud
Poseidon2 remote monitoring device can be connected to cloud systems. Contact us for details.
- Surveillance systems
Sensor readings and detector states can be fed to IP camera systems of various brands. Digital Outputs can be used to turn on the lights in a certain zone or open/close gates.
- Smart buildings
Sensor readings can be shared in several applications. Relay outputs can be controlled as remote I/O.
Live demo: http://damocles-2404.hwg.cz/values.xml//TruePath is the exclusive partner of HWgroup covering their entire product line. Feel free to contact us for direct sales, distributor sales and technical support.